Dante Virtual Soundcard does not detect my network interface. Why?

Dante Virtual Soundcard does not detect my network interface. Why?

(from audinate.com: LINK)

If you are using a computer that has multiple network interfaces, you may encounter an issue where DVS does not allow the selection of a network interface, or does not acquire an IP address.

The current workaround is to open Dante Controller on the machine running DVS, and in the ‘Configure Dante Interfaces’ dialog, ensure that the checkbox for ‘Use shared Dante interfaces’ is selected. This instructs other Dante software applications (DVS, Via, and Firmware Update Manager) to use the same interface that is currently selected in Dante Controller.

    • Related Articles

    • Which Network Ports does Dante Use?

      (from audinate.com: LINK) General Dante Ports External Address Port Usage Type 239.255.0.0/16 4321 ATP Multicast Audio Multicast 239.69.0.0/16 5004 AES67 Multicast Audio (RTP / AVP port) Multicast 224.0.1.129-132 319, 320 PTP Multicast & Unicast when ...